You can lock down a typical home Wi-Fi router in about 30 minutes by changing six things: the admin password, the Wi-Fi encryption (WPA3, or WPA2 if you must), firmware updates, three risky convenience features (WPS, UPnP and remote management), a separate guest network, and the router itself if it no longer gets updates. Those steps match the current advice from the FTC, the NSA and a CISA-backed training module, and none of them needs technical skill.
The router is the front door to every phone, laptop, TV and smart plug in your home. Most people set it up once, leave the factory settings in place and never open its settings again. This guide walks through each change in order, explains what it does in plain terms, and covers what to do if something stops working afterwards.
Key takeaways
- Change the router admin password, not just the Wi-Fi password. They are two different things.
- Use WPA3-Personal, or WPA2/WPA3 mixed mode if older devices cannot connect. Never WEP, WPA or open Wi-Fi.
- Turn off WPS, UPnP and remote management unless you have a specific reason to keep one.
- Put visitors and smart-home gadgets on a guest network with its own password.
- If your router no longer gets firmware updates, replace it. The FBI has warned that old routers are being hijacked.

What do you need before you start?
Set aside half an hour when nobody in the house needs the internet, because the router may restart a few times. Have three things ready:
- How to reach the settings. Many newer routers and mesh systems are managed through the maker's phone app. Others use a web page you open by typing an address such as 192.168.0.1 or 192.168.1.1 into a browser while connected to the network. The exact address and the default login are usually printed on a label on the bottom or back of the router.
- A password manager or a safe place to write things down. You will create two new passwords: one for the admin login and one for the Wi-Fi itself. Our guide to passwords, 2FA and passkeys covers how to store them.
- A device on a cable, if possible. Changing Wi-Fi settings will disconnect wireless devices, including the one you are using. A laptop plugged in with an Ethernet cable stays connected throughout.
If your internet provider supplied the router, some settings may be locked or managed remotely by the provider. That is normal. Change what you can, and call the provider for the rest, especially firmware updates and encryption options.
How do you lock down your router, step by step?
- Log in and change the admin password (5 minutes). Replace the default username and password with a long, random one stored in your password manager.
- Update the firmware (5 minutes). Install any pending update and switch on automatic updates if the router offers them.
- Set Wi-Fi security to WPA3-Personal (3 minutes). Choose WPA2/WPA3 mixed mode if an older device cannot join.
- Rename the network and set a new Wi-Fi password (3 minutes). Avoid your name, address or router brand in the network name.
- Turn off WPS, UPnP and remote management (5 minutes). Save the changes.
- Create a guest network (5 minutes). Give it a different name and password, and use it for visitors and smart-home gadgets.
- Log out, reboot and reconnect your devices (4 minutes). Check that phones, TVs and smart speakers come back online.
1. Change the admin password
The admin password protects the router's own settings. If it is still the default, anyone who gets onto your network, or anyone who looks up your model online, may be able to sign in and change things. The FTC tells people to change the preset admin username and password, and the CISA-backed Project Upskill module recommends long, random and unique credentials. A password manager can generate one for you. When you finish any session in the settings, log out, as the FTC also advises.
Some routers sold in the UK now ship with a unique password per device, because the UK's product security law has banned universal default passwords on connectable products since April 2024. Even so, a unique factory password is printed on a sticker that anyone in your home can read, so changing it is still worth doing.
2. Update the firmware and turn on automatic updates
Firmware is the router's operating system. Updates fix security holes that attackers actively scan for. The NSA recommends keeping router firmware patched, preferably through automatic updates. Look for a section called Firmware, Software Update, Administration or System. In app-managed routers it is often under Settings or Device. If the router has no automatic option, the FTC suggests registering the product with its maker so you hear about new versions, and checking the maker's support site from time to time.
3. Choose WPA3, or WPA2 if you have to
WPA3 is the current Wi-Fi security standard. The Wi-Fi Alliance, which certifies Wi-Fi products, says WPA3-Personal gives stronger protection against password guessing and that WPA3 is now mandatory for Wi-Fi CERTIFIED devices. In the wireless or security settings, pick WPA3-Personal. If a printer, older laptop or smart gadget refuses to connect, switch to the mixed WPA2/WPA3 option, which the NSA guidance also allows for compatibility.
Avoid anything labeled WEP, WPA (without a number) or "open". The FTC calls those options outdated, and CISA's training module adds WPA2 with TKIP to the unsafe list. If WPA2 with AES is the best your router can do, it is still acceptable for now, but it is a sign the router is getting old.
4. Rename the network and set a strong Wi-Fi password
The network name (SSID) is what neighbors see in their list of networks. Leave out your surname, house number and the router brand, since the brand hints at which default settings and known flaws might apply. For the Wi-Fi password itself, CISA's module suggests a passphrase of five to seven unrelated words, at least 16 characters long, that you do not use anywhere else. The NSA goes further and recommends at least 20 characters. A passphrase of random words is long enough to resist guessing and still easy to type on a TV remote.
5. Turn off WPS, UPnP and remote management
These three features trade security for convenience, and the FTC recommends turning all three off.
- WPS (Wi-Fi Protected Setup) lets a device join by pressing a button or typing a short PIN instead of the full password. CISA's module warns it makes unauthorized access easier.
- UPnP (Universal Plug and Play) lets devices on your network open doors through the router to the internet on their own, without asking you. The NSA recommends disabling it. Some game consoles and video-calling apps use it; CISA's module notes you can switch it on briefly while setting up a device, then turn it off again.
- Remote management (sometimes called remote administration or web access from WAN) lets the router's settings be reached from the internet. The FBI warned in May 2025 that criminals were infecting old routers that had remote administration switched on and selling access to them as proxy services. Turn it off, save, and reboot.
6. Create a guest network for visitors and smart gadgets
A guest network is a second Wi-Fi network from the same router, with its own name and password, that cannot see the devices on your main network. The FTC says it limits how many people know your main password and keeps malware on a visitor's phone away from your computers. CISA's module recommends using it for smart-home devices that only need internet access, such as plugs, bulbs and speakers, and the NSA suggests separating primary, guest and smart-home traffic where your router allows it. Our home network and smart-home guide covers how to plan that split.
Moving smart devices to a new network usually means reconnecting each one in its app. Do it gradually if you have many, and note that some gadgets, such as casting devices, may need to be on the same network as the phone that controls them.
| Router setting | Safe value | Why it matters | Where to find it (names vary) |
|---|---|---|---|
| Admin password | Long, random, unique; stored in a password manager | Stops anyone on your network from changing settings | Administration, System or Management |
| Firmware | Latest version; automatic updates on | Closes holes that attackers scan for | Firmware, Software Update or Device |
| Wi-Fi security | WPA3-Personal, or WPA2/WPA3 mixed | Stronger protection against password guessing | Wireless, Wi-Fi or Security |
| Wi-Fi password | Passphrase of 16+ characters, not reused | Keeps outsiders off the network | Wireless or Wi-Fi |
| WPS | Off | Short PIN or button is easier to abuse | Wireless, WPS or Advanced |
| UPnP | Off (on briefly only if a device needs it) | Stops devices opening ports on their own | Advanced, NAT or Gaming |
| Remote management | Off | Keeps settings unreachable from the internet | Administration or Remote Access |
| Guest network | On, with its own password | Separates visitors and smart gadgets | Guest Network or Wireless |
Settings recommended by the FTC, NSA and CISA-backed Project Upskill (accessed October 2026). Menu names differ by router brand and app.
7. Log out, reboot and check your devices
Restart the router so every change takes effect, then reconnect phones, laptops, TVs and speakers with the new password. The NSA also suggests scheduling a weekly reboot, which many routers can do automatically from their settings. A reboot does not remove every kind of infection, but it can clear some malware that lives only in memory.
Is your router too old to secure?
Settings cannot fix a router the maker has stopped updating. The NSA says routers should be replaced when they reach end of life for support. In its May 2025 warning, the FBI said routers from 2010 or earlier are likely no longer getting updates and named old models that criminals were taking over. Signs of trouble it listed include a router that overheats, connection problems and settings changes you do not recognize.
To check, search the maker's support site for your model number and look for an end-of-life or end-of-support notice, or look at the date of the last firmware release. If nothing has shipped in several years, plan to replace it. If your provider supplied it, ask them for a newer model.
One new rule may affect what you can buy. On March 23, 2026, the FCC added consumer routers produced outside the US to its Covered List, which blocks new foreign-made models from getting FCC equipment authorization unless they receive a government conditional approval. The FCC set no requirements for routers already in homes. In May 2026 it said makers can keep sending security fixes to previously authorized models until at least January 1, 2029. So a router you own today is not affected by the listing, but keep checking that it still gets updates.
What should you do if something stops working?
- A device will not connect after switching to WPA3. Change the security mode to WPA2/WPA3 mixed. If it still fails, forget the network on the device and rejoin it with the new password.
- You are locked out of the settings. Most routers have a recessed reset button. Holding it for several seconds restores factory settings, including the default login on the label, and you will need to repeat this guide from the start.
- A game console or video app complains about its network type after UPnP is off. Check the device maker's help page for the specific ports it needs and set them up manually, or turn UPnP on only while you test.
- A smart gadget vanished after the move to the guest network. Some devices only join 2.4 GHz networks. Check that your guest network offers 2.4 GHz, and reconnect the device in its own app.
- You suspect the router was already compromised. The FBI suggests updating firmware, changing passwords and rebooting. If problems continue, reset it to factory settings or replace it, and report incidents at ic3.gov.
When this is not the right move, and the limits
A locked-down router protects the network, not every device on it. A phone with an outdated operating system or a laptop with malware can still be attacked, so keep devices updated too. Router settings also do nothing for you on public Wi-Fi; a VPN or your phone's hotspot is the better tool there.
If you rent or live in a building with shared internet, you may not control the router at all. In that case, ask the landlord or provider which security mode is in use, and consider adding your own router behind theirs, which the NSA describes as a way to gain more control. Turning off UPnP can also be more trouble than it is worth for households that rely on certain consoles or older smart devices. If you keep it on, make sure the router is otherwise up to date and the admin password is strong.
Finally, mesh systems and provider-managed gateways sometimes hide or lock these options. Where a setting is missing, it may already be off by default. Check the maker's support page before assuming the worst.
Frequently asked questions
Should I change my router's default password?
Yes. Change the admin password that protects the router's settings and the Wi-Fi password your devices use to join. The FTC recommends replacing both, along with the default network name. Store the new passwords in a password manager so you do not get locked out.
Is WPA3 better than WPA2?
Yes. The Wi-Fi Alliance says WPA3-Personal gives stronger protection against password guessing, and WPA3 is mandatory for newly certified Wi-Fi devices. WPA2 with AES is still acceptable if your router or devices cannot use WPA3, but WEP, original WPA and open networks are not.
Should I turn off WPS and UPnP?
For most homes, yes. The FTC recommends turning off WPS, UPnP and remote management, and the NSA specifically recommends disabling UPnP. If a game console or app needs UPnP, you can switch it on briefly during setup and turn it off again afterwards.
How often should I update or reboot my router?
Turn on automatic firmware updates if the router offers them, and otherwise check for updates every few months. The NSA suggests rebooting at least once a week, which many routers can schedule for you.
Do I need to replace my router because of the FCC ban?
No. The FCC's March 2026 Covered List addition blocks authorization of new foreign-made router models but sets no requirements for routers already in homes. Replace your router only if it no longer gets security updates or cannot use WPA2 or WPA3.
Sources
- FTC Consumer Advice: How To Secure Your Home Wi-Fi Network (accessed October 2026)
- NSA: Best Practices for Securing Your Home Network (February 2023) (accessed October 2026)
- JCDC Project Upskill (CISA): Module 5, Securing Your Home Wi-Fi (accessed October 2026)
- FBI IC3 public service announcement 050725: Proxy services exploit end-of-life routers (May 7, 2025) (accessed October 2026)
- Wi-Fi Alliance: Wi-Fi security (accessed October 2026)
- FCC Public Notice DA 26-278: Covered List update, routers (March 23, 2026) (accessed October 2026)
- FCC DA 26-454: Extension of software and firmware update waivers (May 8, 2026) (accessed October 2026)
- UK government: The UK Product Security and Telecommunications Infrastructure (PSTI) product security regime (accessed October 2026)
Top image: "ELECOM WRC-300FEBK WPS WiFi router" by Syced, CC0, via Wikimedia Commons (resized). Charts and tables by Thank You Robot.
0 Comments